[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
Locked
12
12
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
 
|
Github user Hexiaoqiao commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 @sraghunandan Thanks for your contribution about guide docs. when preview these docs, i found there are still some unexpected format, please update: 1. some quotation show is not correct, for instance: `""/carbonlib/carbonplugins`, 2. some seq. no. reset to 1 is unexpected, as `1. Verify the installation. For example:`. please correct me if i am wrong. --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r104292362 --- Diff: docs/installation-guide.md --- @@ -92,77 +96,87 @@ To get started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Opera The following steps are only for Driver Nodes. (Driver nodes are the one which starts the spark context.) -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar` and copy to `<SPARK_HOME>/carbonlib` folder. + + **NOTE**: Create the carbonlib folder if it does not exists inside `<SPARK_HOME>` path. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. +2. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. -* Copy "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. - carbonplugins will contain .kettle folder. + **NOTE**: carbonplugins will contain .kettle folder. -* Copy the "carbon.properties.template" to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from conf folder of CarbonData repository. -* Modify the parameters in "spark-default.conf" located in the ``"<SPARK_HOME>/conf``" +3. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. + +4. Create `tar,gz` file of carbonlib folder and move it inside the carbonlib folder. + +``` + cd <SPARK_HOME> + tar -zcvf carbondata.tar.gz carbonlib/ + mv carbondata.tar.gz carbonlib/ +``` + +5. Configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. | Property | Description | Value | |---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| -| spark.master | Set this value to run the Spark in yarn cluster mode. | Set "yarn-client" to run the Spark in yarn cluster mode. | -| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbondata_xxx.jar`` | -| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance NOTE: You can enter multiple values separated by space. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| carbon.kettle.home | Path that will be used by CarbonData internally to create graph for loading the data. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonplugins`` | +| spark.master | Set this value to run the Spark in yarn cluster mode. | Set yarn-client to run the Spark in yarn cluster mode. | +| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |"<SPARK_HOME>"/conf/carbon.properties | +| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |"<SPARK_HOME>"/carbonlib/carbondata.tar.gz | +| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance **NOTE**: You can enter multiple values separated by space. |-Dcarbon.properties.filepath=carbon.properties | +| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |carbondata.tar.gz/carbonlib/* | +| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |"<SPARK_HOME>"/carbonlib/carbonlib/* | +| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |-Dcarbon.properties.filepath="<SPARK_HOME>"/conf/carbon.properties | + -* Add the following properties in ``<SPARK_HOME>/conf/ carbon.properties``: +6. Add the following properties in `<SPARK_HOME>/conf/carbon.properties`: | Property | Required | Description | Example | Default Value | |----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| | carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| -| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | $SPARK_HOME/carbonlib/carbonplugins | | +| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | carbondata.tar.gz/carbonlib/carbonplugins | | -* Verify the installation. +7. Verify the installation. ``` ./bin/spark-shell --master yarn-client --driver-memory 1g --executor-cores 2 --executor-memory 2G ``` - NOTE: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. + **NOTE**: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. Getting started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Operations on CarbonData](ddl-operation-on-carbondata.md) ## Query Execution Using CarbonData Thrift Server -### Starting CarbonData Thrift Server +### Starting CarbonData Thrift Server. - a. cd ``<SPARK_HOME>`` + a. cd `<SPARK_HOME>` b. Run the following command to start the CarbonData thrift server. ``` ./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true --class org.apache.carbondata.spark.thriftserver.CarbonThriftServer -$SPARK_HOME/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> +<SPARK_HOME>/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> ``` | Parameter | Description | Example | |---------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------| -| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the ``"<SPARK_HOME>"/carbonlib/`` folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | -| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | ``hdfs//<host_name>:54310/user/hive/warehouse/carbon.store`` | +| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the "<SPARK_HOME>"/carbonlib/ folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | +| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | hdfs//<host_name>:port/user/hive/warehouse/carbon.store | -### Examples +**Examples** - * Start with default memory and executors + * Start with default memory and executors. ``` ./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true --class org.apache.carbondata.spark.thriftserver.CarbonThriftServer -$SPARK_HOME/carbonlib +<SPARK_HOME>/carbonlib /carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar -hdfs://hacluster/user/hive/warehouse/carbon.store +hdfs://1.1.1.1:54310/user/hive/warehouse/carbon.store --- End diff -- fixed --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r104292371 --- Diff: docs/installation-guide.md --- @@ -171,10 +185,10 @@ hdfs://hacluster/user/hive/warehouse/carbon.store --executor-cores 32 /srv/OSCON/BigData/HACluster/install/spark/sparkJdbc/lib /carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar -hdfs://hacluster/user/hive/warehouse/carbon.store +hdfs://1.1.1.1:54310/user/hive/warehouse/carbon.store --- End diff -- fixed --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r104292379 --- Diff: docs/installation-guide.md --- @@ -92,77 +96,87 @@ To get started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Opera The following steps are only for Driver Nodes. (Driver nodes are the one which starts the spark context.) -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar` and copy to `<SPARK_HOME>/carbonlib` folder. + + **NOTE**: Create the carbonlib folder if it does not exists inside `<SPARK_HOME>` path. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. +2. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. -* Copy "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. - carbonplugins will contain .kettle folder. + **NOTE**: carbonplugins will contain .kettle folder. -* Copy the "carbon.properties.template" to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from conf folder of CarbonData repository. -* Modify the parameters in "spark-default.conf" located in the ``"<SPARK_HOME>/conf``" +3. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. + +4. Create `tar,gz` file of carbonlib folder and move it inside the carbonlib folder. + +``` + cd <SPARK_HOME> + tar -zcvf carbondata.tar.gz carbonlib/ + mv carbondata.tar.gz carbonlib/ +``` + +5. Configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. | Property | Description | Value | |---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| -| spark.master | Set this value to run the Spark in yarn cluster mode. | Set "yarn-client" to run the Spark in yarn cluster mode. | -| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbondata_xxx.jar`` | -| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance NOTE: You can enter multiple values separated by space. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| carbon.kettle.home | Path that will be used by CarbonData internally to create graph for loading the data. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonplugins`` | +| spark.master | Set this value to run the Spark in yarn cluster mode. | Set yarn-client to run the Spark in yarn cluster mode. | +| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |"<SPARK_HOME>"/conf/carbon.properties | +| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |"<SPARK_HOME>"/carbonlib/carbondata.tar.gz | +| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance **NOTE**: You can enter multiple values separated by space. |-Dcarbon.properties.filepath=carbon.properties | +| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |carbondata.tar.gz/carbonlib/* | +| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |"<SPARK_HOME>"/carbonlib/carbonlib/* | +| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |-Dcarbon.properties.filepath="<SPARK_HOME>"/conf/carbon.properties | + -* Add the following properties in ``<SPARK_HOME>/conf/ carbon.properties``: +6. Add the following properties in `<SPARK_HOME>/conf/carbon.properties`: | Property | Required | Description | Example | Default Value | |----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| | carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| -| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | $SPARK_HOME/carbonlib/carbonplugins | | +| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | carbondata.tar.gz/carbonlib/carbonplugins | | -* Verify the installation. +7. Verify the installation. ``` ./bin/spark-shell --master yarn-client --driver-memory 1g --executor-cores 2 --executor-memory 2G ``` - NOTE: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. + **NOTE**: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. Getting started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Operations on CarbonData](ddl-operation-on-carbondata.md) ## Query Execution Using CarbonData Thrift Server -### Starting CarbonData Thrift Server +### Starting CarbonData Thrift Server. - a. cd ``<SPARK_HOME>`` + a. cd `<SPARK_HOME>` b. Run the following command to start the CarbonData thrift server. ``` ./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true --class org.apache.carbondata.spark.thriftserver.CarbonThriftServer -$SPARK_HOME/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> +<SPARK_HOME>/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> ``` | Parameter | Description | Example | |---------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------| -| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the ``"<SPARK_HOME>"/carbonlib/`` folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | -| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | ``hdfs//<host_name>:54310/user/hive/warehouse/carbon.store`` | +| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the "<SPARK_HOME>"/carbonlib/ folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | +| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | hdfs//<host_name>:port/user/hive/warehouse/carbon.store | --- End diff -- fixed --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 updated the comments --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
|
|
In reply to this post by qiuchenjian-2
Github user CarbonDataQA commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 Build Success with Spark 1.6.2, Please check CI http://136.243.101.176:8080/job/ApacheCarbonPRBuilder/1004/ --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user Hexiaoqiao commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r104309680 --- Diff: docs/installation-guide.md --- @@ -40,42 +40,46 @@ followed by : ### Procedure -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar`. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. +2. Copy `./assembly/target/scala-2.1x/carbondata_xxx.jar` to `<SPARK_HOME>/carbonlib` folder. -* Add the carbonlib folder path in the Spark classpath. (Edit ``"<SPARK_HOME>/conf/spark-env.sh"`` file and modify the value of SPARK_CLASSPATH by appending ``"<SPARK_HOME>/carbonlib/*"`` to the existing value) + **NOTE**: Create the carbonlib folder if it does not exist inside `<SPARK_HOME>` path. -* Copy the carbon.properties.template to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from "./conf/" of CarbonData repository. +3. Add the carbonlib folder path in the Spark classpath. (Edit `<SPARK_HOME>/conf/spark-env.sh` file and modify the value of `SPARK_CLASSPATH` by appending `<SPARK_HOME>/carbonlib/*` to the existing value) -* Copy the "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. +4. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. - NOTE: carbonplugins will contain .kettle folder. +5. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. + + **NOTE**: carbonplugins will contain .kettle folder. + +6. Repeat Step 2 to Step 5 in all the nodes of the cluster. -* In Spark node, configure the properties mentioned in the following table in ``"<SPARK_HOME>/conf/spark-defaults.conf"`` file. +7. In Spark node[master], configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. -| Property | Value | Description | -|---------------------------------|-----------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------| -| carbon.kettle.home | $SPARK_HOME /carbonlib/carbonplugins | Path that will be used by CarbonData internally to create graph for loading the data | -| spark.driver.extraJavaOptions | -Dcarbon.properties.filepath=$SPARK_HOME/conf/carbon.properties | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. | -| spark.executor.extraJavaOptions | -Dcarbon.properties.filepath=$SPARK_HOME/conf/carbon.properties | A string of extra JVM options to pass to executors. For instance, GC settings or other logging. NOTE: You can enter multiple values separated by space. | + | Property | Value | Description | + |---------------------------------|-----------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------| + | carbon.kettle.home | "<SPARK_HOME>"/carbonlib/carbonplugins | Path that will be used by CarbonData internally to create graph for loading the data | --- End diff -- @sraghunandan Please use `$SPARK_HOME` rather than `"<SPARK_HOME>"` cause markdown will treat it as annotate and not show it. --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user Hexiaoqiao commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r104309761 --- Diff: docs/installation-guide.md --- @@ -92,77 +96,87 @@ To get started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Opera The following steps are only for Driver Nodes. (Driver nodes are the one which starts the spark context.) -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar` and copy to `<SPARK_HOME>/carbonlib` folder. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. + **NOTE**: Create the carbonlib folder if it does not exists inside `<SPARK_HOME>` path. -* Copy "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. - carbonplugins will contain .kettle folder. +2. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. -* Copy the "carbon.properties.template" to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from conf folder of CarbonData repository. -* Modify the parameters in "spark-default.conf" located in the ``"<SPARK_HOME>/conf``" + **NOTE**: carbonplugins will contain .kettle folder. -| Property | Description | Value | -|---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| -| spark.master | Set this value to run the Spark in yarn cluster mode. | Set "yarn-client" to run the Spark in yarn cluster mode. | -| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbondata_xxx.jar`` | -| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance NOTE: You can enter multiple values separated by space. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| carbon.kettle.home | Path that will be used by CarbonData internally to create graph for loading the data. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonplugins`` | +3. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. -* Add the following properties in ``<SPARK_HOME>/conf/ carbon.properties``: +4. Create `tar,gz` file of carbonlib folder and move it inside the carbonlib folder. -| Property | Required | Description | Example | Default Value | -|----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| -| carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| -| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | $SPARK_HOME/carbonlib/carbonplugins | | +``` + cd <SPARK_HOME> + tar -zcvf carbondata.tar.gz carbonlib/ + mv carbondata.tar.gz carbonlib/ +``` +5. Configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. -* Verify the installation. + | Property | Description | Value | + |---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| + | spark.master | Set this value to run the Spark in yarn cluster mode. | Set yarn-client to run the Spark in yarn cluster mode. | + | spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |"<SPARK_HOME>"/conf/carbon.properties | + | spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |"<SPARK_HOME>"/carbonlib/carbondata.tar.gz | + | spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance **NOTE**: You can enter multiple values separated by space. |-Dcarbon.properties.filepath=carbon.properties | + | spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |carbondata.tar.gz/carbonlib/* | + | spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |"<SPARK_HOME>"/carbonlib/carbonlib/* | + | spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |-Dcarbon.properties.filepath="<SPARK_HOME>"/conf/carbon.properties | -``` + +6. Add the following properties in `<SPARK_HOME>/conf/carbon.properties`: + + | Property | Required | Description | Example | Default Value | + |----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| + | carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| + | carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | carbondata.tar.gz/carbonlib/carbonplugins | | + + +7. Verify the installation. + + ``` ./bin/spark-shell --master yarn-client --driver-memory 1g --executor-cores 2 --executor-memory 2G -``` - NOTE: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. + ``` + **NOTE**: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. Getting started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Operations on CarbonData](ddl-operation-on-carbondata.md) ## Query Execution Using CarbonData Thrift Server -### Starting CarbonData Thrift Server +### Starting CarbonData Thrift Server. - a. cd ``<SPARK_HOME>`` + a. cd `<SPARK_HOME>` b. Run the following command to start the CarbonData thrift server. -``` -./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true ---class org.apache.carbondata.spark.thriftserver.CarbonThriftServer -$SPARK_HOME/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> -``` + ``` + ./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true + --class org.apache.carbondata.spark.thriftserver.CarbonThriftServer + <SPARK_HOME>/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> + ``` -| Parameter | Description | Example | -|---------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------| -| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the ``"<SPARK_HOME>"/carbonlib/`` folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | -| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | ``hdfs//<host_name>:54310/user/hive/warehouse/carbon.store`` | + | Parameter | Description | Example | --- End diff -- The syntax of this table may be not correct, please click `view` button which is locate at top-right corner for check & review. --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
|
|
In reply to this post by qiuchenjian-2
Github user CarbonDataQA commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 Build Success with Spark 1.6.2, Please check CI http://136.243.101.176:8080/job/ApacheCarbonPRBuilder/1057/ --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r105143032 --- Diff: docs/installation-guide.md --- @@ -40,42 +40,46 @@ followed by : ### Procedure -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar`. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. +2. Copy `./assembly/target/scala-2.1x/carbondata_xxx.jar` to `<SPARK_HOME>/carbonlib` folder. -* Add the carbonlib folder path in the Spark classpath. (Edit ``"<SPARK_HOME>/conf/spark-env.sh"`` file and modify the value of SPARK_CLASSPATH by appending ``"<SPARK_HOME>/carbonlib/*"`` to the existing value) + **NOTE**: Create the carbonlib folder if it does not exist inside `<SPARK_HOME>` path. -* Copy the carbon.properties.template to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from "./conf/" of CarbonData repository. +3. Add the carbonlib folder path in the Spark classpath. (Edit `<SPARK_HOME>/conf/spark-env.sh` file and modify the value of `SPARK_CLASSPATH` by appending `<SPARK_HOME>/carbonlib/*` to the existing value) -* Copy the "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. +4. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. - NOTE: carbonplugins will contain .kettle folder. +5. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. + + **NOTE**: carbonplugins will contain .kettle folder. + +6. Repeat Step 2 to Step 5 in all the nodes of the cluster. -* In Spark node, configure the properties mentioned in the following table in ``"<SPARK_HOME>/conf/spark-defaults.conf"`` file. +7. In Spark node[master], configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. -| Property | Value | Description | -|---------------------------------|-----------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------| -| carbon.kettle.home | $SPARK_HOME /carbonlib/carbonplugins | Path that will be used by CarbonData internally to create graph for loading the data | -| spark.driver.extraJavaOptions | -Dcarbon.properties.filepath=$SPARK_HOME/conf/carbon.properties | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. | -| spark.executor.extraJavaOptions | -Dcarbon.properties.filepath=$SPARK_HOME/conf/carbon.properties | A string of extra JVM options to pass to executors. For instance, GC settings or other logging. NOTE: You can enter multiple values separated by space. | + | Property | Value | Description | + |---------------------------------|-----------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------| + | carbon.kettle.home | "<SPARK_HOME>"/carbonlib/carbonplugins | Path that will be used by CarbonData internally to create graph for loading the data | --- End diff -- fixed --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
|
|
In reply to this post by qiuchenjian-2
Github user CarbonDataQA commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 Build Success with Spark 1.6.2, Please check CI http://136.243.101.176:8080/job/ApacheCarbonPRBuilder/1058/ --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user sraghunandan commented on a diff in the pull request:
https://github.com/apache/incubator-carbondata/pull/611#discussion_r105143178 --- Diff: docs/installation-guide.md --- @@ -92,77 +96,87 @@ To get started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Opera The following steps are only for Driver Nodes. (Driver nodes are the one which starts the spark context.) -* [Build the CarbonData](https://cwiki.apache.org/confluence/display/CARBONDATA/Building+CarbonData+And+IDE+Configuration) project and get the assembly jar from "./assembly/target/scala-2.10/carbondata_xxx.jar" and put in the ``"<SPARK_HOME>/carbonlib"`` folder. +1. [Build the CarbonData](https://github.com/apache/incubator-carbondata/blob/master/build/README.md) project and get the assembly jar from `./assembly/target/scala-2.1x/carbondata_xxx.jar` and copy to `<SPARK_HOME>/carbonlib` folder. - NOTE: Create the carbonlib folder if it does not exists inside ``"<SPARK_HOME>"`` path. + **NOTE**: Create the carbonlib folder if it does not exists inside `<SPARK_HOME>` path. -* Copy "carbonplugins" folder to ``"<SPARK_HOME>/carbonlib"`` folder from "./processing/" folder of CarbonData repository. - carbonplugins will contain .kettle folder. +2. Copy the `./processing/carbonplugins` folder from CarbonData repository to `<SPARK_HOME>/carbonlib/` folder. -* Copy the "carbon.properties.template" to ``"<SPARK_HOME>/conf/carbon.properties"`` folder from conf folder of CarbonData repository. -* Modify the parameters in "spark-default.conf" located in the ``"<SPARK_HOME>/conf``" + **NOTE**: carbonplugins will contain .kettle folder. -| Property | Description | Value | -|---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| -| spark.master | Set this value to run the Spark in yarn cluster mode. | Set "yarn-client" to run the Spark in yarn cluster mode. | -| spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbondata_xxx.jar`` | -| spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance NOTE: You can enter multiple values separated by space. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. NOTE: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonlib/carbondata_xxx.jar`` | -| spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |``-Dcarbon.properties.filepath="<YOUR_SPARK_HOME_PATH>"/conf/carbon.properties`` | -| carbon.kettle.home | Path that will be used by CarbonData internally to create graph for loading the data. |``"<YOUR_SPARK_HOME_PATH>"/carbonlib/carbonplugins`` | +3. Copy the `./conf/carbon.properties.template` file from CarbonData repository to `<SPARK_HOME>/conf/` folder and rename the file to `carbon.properties`. -* Add the following properties in ``<SPARK_HOME>/conf/ carbon.properties``: +4. Create `tar,gz` file of carbonlib folder and move it inside the carbonlib folder. -| Property | Required | Description | Example | Default Value | -|----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| -| carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| -| carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | $SPARK_HOME/carbonlib/carbonplugins | | +``` + cd <SPARK_HOME> + tar -zcvf carbondata.tar.gz carbonlib/ + mv carbondata.tar.gz carbonlib/ +``` +5. Configure the properties mentioned in the following table in `<SPARK_HOME>/conf/spark-defaults.conf` file. -* Verify the installation. + | Property | Description | Value | + |---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------------------------------------------------------------------| + | spark.master | Set this value to run the Spark in yarn cluster mode. | Set yarn-client to run the Spark in yarn cluster mode. | + | spark.yarn.dist.files | Comma-separated list of files to be placed in the working directory of each executor. |"<SPARK_HOME>"/conf/carbon.properties | + | spark.yarn.dist.archives | Comma-separated list of archives to be extracted into the working directory of each executor. |"<SPARK_HOME>"/carbonlib/carbondata.tar.gz | + | spark.executor.extraJavaOptions | A string of extra JVM options to pass to executors. For instance **NOTE**: You can enter multiple values separated by space. |-Dcarbon.properties.filepath=carbon.properties | + | spark.executor.extraClassPath | Extra classpath entries to prepend to the classpath of executors. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the values in below parameter spark.driver.extraClassPath |carbondata.tar.gz/carbonlib/* | + | spark.driver.extraClassPath | Extra classpath entries to prepend to the classpath of the driver. **NOTE**: If SPARK_CLASSPATH is defined in spark-env.sh, then comment it and append the value in below parameter spark.driver.extraClassPath. |"<SPARK_HOME>"/carbonlib/carbonlib/* | + | spark.driver.extraJavaOptions | A string of extra JVM options to pass to the driver. For instance, GC settings or other logging. |-Dcarbon.properties.filepath="<SPARK_HOME>"/conf/carbon.properties | -``` + +6. Add the following properties in `<SPARK_HOME>/conf/carbon.properties`: + + | Property | Required | Description | Example | Default Value | + |----------------------|----------|----------------------------------------------------------------------------------------|-------------------------------------|---------------| + | carbon.storelocation | NO | Location where CarbonData will create the store and write the data in its own format. | hdfs://HOSTNAME:PORT/Opt/CarbonStore | Propose to set HDFS directory| + | carbon.kettle.home | YES | Path that will be used by CarbonData internally to create graph for loading the data. | carbondata.tar.gz/carbonlib/carbonplugins | | + + +7. Verify the installation. + + ``` ./bin/spark-shell --master yarn-client --driver-memory 1g --executor-cores 2 --executor-memory 2G -``` - NOTE: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. + ``` + **NOTE**: Make sure you have permissions for CarbonData JARs and files through which driver and executor will start. Getting started with CarbonData : [Quick Start](quick-start-guide.md), [DDL Operations on CarbonData](ddl-operation-on-carbondata.md) ## Query Execution Using CarbonData Thrift Server -### Starting CarbonData Thrift Server +### Starting CarbonData Thrift Server. - a. cd ``<SPARK_HOME>`` + a. cd `<SPARK_HOME>` b. Run the following command to start the CarbonData thrift server. -``` -./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true ---class org.apache.carbondata.spark.thriftserver.CarbonThriftServer -$SPARK_HOME/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> -``` + ``` + ./bin/spark-submit --conf spark.sql.hive.thriftServer.singleSession=true + --class org.apache.carbondata.spark.thriftserver.CarbonThriftServer + <SPARK_HOME>/carbonlib/$CARBON_ASSEMBLY_JAR <carbon_store_path> + ``` -| Parameter | Description | Example | -|---------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------| -| CARBON_ASSEMBLY_JAR | CarbonData assembly jar name present in the ``"<SPARK_HOME>"/carbonlib/`` folder. | carbondata_2.10-0.1.0-incubating-SNAPSHOT-shade-hadoop2.7.2.jar | -| carbon_store_path | This is a parameter to the CarbonThriftServer class. This a HDFS path where CarbonData files will be kept. Strongly Recommended to put same as carbon.storelocation parameter of carbon.properties. | ``hdfs//<host_name>:54310/user/hive/warehouse/carbon.store`` | + | Parameter | Description | Example | --- End diff -- fixed --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata issue #611: [CARBONDATA-731] Enhance and correct quick ...
|
|
In reply to this post by qiuchenjian-2
Github user Hexiaoqiao commented on the issue:
https://github.com/apache/incubator-carbondata/pull/611 LGTM --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
[GitHub] incubator-carbondata pull request #611: [CARBONDATA-731] Enhance and correct...
|
|
In reply to this post by qiuchenjian-2
Github user asfgit closed the pull request at:
https://github.com/apache/incubator-carbondata/pull/611 --- If your project is set up for it, you can reply to this email and have your reply appear on GitHub as well. If your project does not have this feature enabled and wishes so, or if the feature is enabled but not working, please contact infrastructure at [hidden email] or file a JIRA ticket with INFRA. --- |
«
Return to Apache CarbonData JIRA issues
|
1 view|%1 views
| Free forum by Nabble | Edit this page |